|
See details
|
1/4 HP Red Wing Dental Lathe W/ Quick Chuck
Factory installed onto a No. 26 high base, Red Wing Lathe. A full ¼" HP 1725/3450 rpm two speed polishing lathe with 6" [15.2cm] shaft height (115V/60Hz) Designed and built for use as a polishing lathe, its tapered shafts will accept standard dental tapered chucks.
Market price:
$629.00
Our price: $585.00 save 7%
|
|
See details
|
1/4 HP Red Wing Lathe W/ Quick Chuck
Factory installed onto a No. 26 low base, Red Wing Lathe. A full ¼ HP, 1725/3450 rmp lathe for use on top of laboratory bench (115V/60HZ). Its 4 1/2" (11.4 cm) shaft height allows for easy use by the technician with hands resting on the tabletop.
Market price:
$629.00
Our price: $585.00 save 7%
|
|
See details
|
211 Tech-Rite Bench by Handler
Five drawer technician bench with resistop. Resistop is similar to man made slate. Available in charcoal gray color. Built of heavy gauge sheet steel with heavy gauge tubular steel legs, the 211 is shipped complete with four legs with leg levelers, duplex electrical outlet, suction inlet and...
Market price:
$1450.00
Our price: $1353.33 save 7%
|
|
See details
|
215 WS Pedestal Bench By Handler
SIZE: 42" wide x 49" deep x 32" to work surface [107cm x 124cm x 81cm] with 42" wide x 13" deep x 6" high riser [107cm x 33cm x 15cm] top containing a duplex receptacle, suction inlet and knock-outs for air and gas valves on both sides. Bench finished in baked, durable coating. A two...
Market price:
$4595.00
Our price: $4288.67 save 7%
|
|
See details
|
33 Little Giant Flask Press By Handler
A flask manufactured for pressing a single flask. Constructed of malleable/ductile iron, the Little Giant will provide years of trouble free service under normal pressing procedures.
Market price:
$99.00
Our price: $91.38 save 8%
|
|
See details
|
38 Big Boy Flask Press
A Two Flask Press manufactured of malleable/ductile cast iron. Features are the same as 38 Press, except this unit is designed to accommodate two flasks simultaneously.
Market price:
$149.00
Our price: $137.54 save 8%
|
|
See details
|
38A Bench Clamps By Handler
For use in mounting #'s, 33, 38, 38A presses to tabletop. Cast of aluminum alloy for rustproof protection.
Market price:
$18.00
Our price: $16.15 save 10%
|
|
See details
|
39 Manual Denture Press By Handler
This press is built by Handler to give the laboratory technician excellent hand pressing action when trial packing dentures. The Deluxe Press is manufactured from 1" steel plate with a 1"diameter acme threaded center screw.
Market price:
$299.00
Our price: $276.00 save 8%
|
|
See details
|
51 Sandblaster By Handler
A table top sandblaster for use with Sand, Glass Beads or Walnut Shells. The 51 is designed to clean or treat the surfaces of precious castings e.g. copings, pontics, inlays, etc. Its compact size, 10" wide x 10" deep x 14" high [25cm x 25cm x 36cm], with hinged, frontal access door, rubber...
Market price:
$299.00
Our price: $276.00 save 8%
|
|
See details
|
74 EXAC-U-CAST Casting Machine
A Centrifugal Casting Machine designed for use in casting precious and non-precious metals. The Exac-U-Cast features a hardened steel center shaft which is mounted between two double shielded ball bearings. A large centrifugal spring powers the heavy duty casting arm during casting...
Market price:
$579.00
Our price: $534.46 save 8%
|
|
See details
|
74CG Casting Gaurd By Handler
An eight sided casting guard which accommodates casting machines with up to a 19" [48cm] arm swing. Easily bolts together and mounts on table top to help guard centrifugal casting machines.
Market price:
$169.00
Our price: $156.00 save 8%
|
|
See details
|
Boil Out and Curing Unit
A gas fired, double tank boilout/curing unit. Contains two 18 ga. stainless steel tanks: 10" x 14" x 12" deep [25cm x 36cm x 30cm] and 10" x 14" x 10" deep [25cm x 36cm x 25cm] with inside handles. Gas fuel connections are standard 1/2" [1.3cm] NPT.
Market price:
$3595.00
Our price: $3355.33 save 7%
|
|
See details
|
Boil Out, Washout, and Curing Unit by Handler
A combination boilout/washout/curing unit manufactured of 18 ga. stainless steel with two tanks. Tank sizes are 10" x 14" x 12" deep [25cm x 36cm x 30cm] and 18"x 14" x 10" deep [46cm x 36cm x 25cm].
Market price:
$4995.00
Our price: $4662.00 save 7%
|
|
|
